23 септември 2017

Гривни с мъниста с широк отвор и кожена корда / Large-Hole Beads and Leather Cord Bracelets How-to

Понякога вдъхновението те връхлита изневиделица и ако това се случи в подходящ момент на подходящо място, можеш да направиш чудеса! И за да не забравиш как си ги направил, добре е да си водиш записки 😃 Точно това правя, когато публикувам своите "нещо като урочета" и днес ще ви разкажа как да изработите красива и необикновена гривна с мъниста с широк отвор и кожени корди като тази на снимката по-долу от миналата година (добре, че от време на време си разглеждам старите албуми!).
Inspiration may strike unexpectedly and if it happens in the right time and place, one can do wonders! And it is a good idea to take notes so that you don't wonder how you made this or that 😃 This is exactly what I am doing by putting together these tutorials (sort of) and today I am going to tell you how to make a beautiful and unusual bracelet with large-hole beads and leather cords like the one in the picture below from last year (revisiting old designs pays off).


Необходими материали:
- мъниста с широк отвор;
- разделители с широк отвор;
- декоративен свързващ елемент (моят е част от комплект закопчалка с кука);
- декоративно копче със столче;
- 2-3 тънки кожени корди (1 мм) в цветовете на мънистата с дължина 1 м;
- халка за закрепване на копчето от по-дебела тел;
- плоски клещи (за отваряне и затваряне на халката);
- клещи-резачки или ножица за рязане на кожената корда;
- моментно лепило или такова за кожа (по желание);
- уроче за кожените разделители;
- хитринка за възли.
Tools and materials:
- large-hole beads;
- large-hole spacers;
- decorative connector (mine came from a hook clasp set);
- decorative shank button;
- two or three thin leather cords (1 mm) in matching colors, one yard each;
- a sturdy jump ring to attach the button;
- flat nose pliers for opening and closing the jump ring;
- scissors or cutting pliers to cut the leather cord;
- instant or leather glue (optional);
- tutorial for the leather knot spacers;
- a handy tip for the knots.


Промушвате кожените корди през единия край на декоративния свързващ елемент и го поставяте по средата. Промушвате краищата през разделителя с широк отвор.
String one end of the decorative connector onto the leather cords and slide it to the middle. String the large-hole spacer through all cords.


Правите възел с една-две от кожените корди и нанизвате едно от мънистата. Продължавате като сменяте цветовете на кожените възли между мънистата.
Make a knot with one or two of the leather cords. String on а large-hole bead. Do this until you use up all the beads, interchanging the colors of the knots.


Кордите, с които правите възлите, стават по-къси, затова ползвайте по-дългите за всеки следващ възел, докато се изравнят. Възлите трябва да са двойни, за да ви стигне тази дължина за гривна ок. 16 см.
The cords you use for the knots will become shorter, so you have to use the longer ones for every next knot until they all become the same length again. I made double knots for a 6" bracelet.


Направете още възли след втория разделител с широк отвор за асиметричен дизайн. Оставете място, колкото да се промуши копчето и направете още един стегнат обикновен възел с всички корди. Добра идея е за него да ползвате подходящо лепило - моментно или за кожа - за по-здраво закопчаване. Отрязвате кожените корди на 1 см от възела.
Make more knots after the last spacer for an asymmetrical look. Leave enough space for the button to go through and make a tight overhand knot with all the cords. It would be a good idea to use glue on this last knot for a safer clasp. Cut off the excess, leaving short ends.


Не се притеснявайте, ако ви останат много малки парченца - можете да си направите пискюл. Закачете декоративното копче за свързващия елемент с халката. Закопчаването става като промушите копчето през кожените корди между последните два възела. Просто и ефектно!
Don't worry about the wastes - you can make a tassel with them! Attach the decorative button to the connector with a jump ring. Push it through the opening between the cords on the other end - this is your clasp. Simple and eye-catching!

В крайна сметка ми досвидя да използвам копчето от снимката с материалите, имам по-добра идея за него. Ако ще правите възлите с отделни парчета корда, започнете с по-малка дължина, отговаряща на размера на гривната плюс 12-тина см за закопчалката и възела (или друга удобна дължина по ваша преценка). 
I didn't end up using that stunning button from the picture with all the materials - I have something else for it in mind. If you're going to make the knots with separate leather pieces, you could start with shorter lengths - the bracelet size plus 6'' for the clasp opening and the last knot (or any length you feel comfortable with).


4 коментара:

  1. What a fabulous idea! I'm never quite sure how best to work with some of those large-hole beads, but this is a fabulous solution. Thanks so much for sharing it!

    ОтговорИзтриване
    Отговори
    1. I'm so glad you like the idea, Hope! I, too, have lots of these beads and am planning to make more of these bracelets. You can make messy or neat knots for different results :)

      Изтриване
  2. I do not know how I missed seeing this tutorial before. Its a great idea. What length of leather did you begin with for a 6" bracelet?

    ОтговорИзтриване
    Отговори
    1. Thank you, Divya! Those bracelets were very populat at my first craft show. A little less than 1 m, maybe 90-95 cm but it would depend on how tight the knots are as well as the thickness of the cord. If you don't make each knot with all the cords, some will stay longer than the others.

      Изтриване

Ще се радвам да ми казвате какво мислите! I appreciate your comments!